Netgear FS526Tv2 - 24-Port Smart Switch with Gigabit Ports User Guide

The PoE Port Configuration screen displays.

Select whether to configure a single port, a group of ports, or all ports:

To configure a single port, select the check box next to the port that you want to 
configure.

The information for the selected port displays in the menu in the table heading.

To configure a group of ports, select the check boxes for the individual ports that you 
want to configure.

To configure all ports, select the check box at the left in the table heading.

Configure the settings as described in the following table:

Port

This is a nonconfigurable field that shows the PoE port number (e1 through e12).

Admin Mode

Specify the administrative state of the port:

•

Enable. The port is switched on and can provide PoE to a powered device 
(PD). This is the default setting.

•

Disable. The port is switched off and cannot provide PoE to a PD.

Max Power

This is a nonconfigurable field that shows the maximum power in watts that the port 
is capable of providing. The value is fixed at 16.2W.