Netgear M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch Software Guide
Manage Device Security
635
M6100, M5300, and M7100 Series Managed Switches
Add a Captive Portal Instance
By default, the switch has one captive portal. You can change the settings for that captive
portal, and you can also create and configure up to nine additional portals.
portal, and you can also create and configure up to nine additional portals.
To add a captive portal instance:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Control > Captive Portal > CP Configuration.
8.
In the CP Name field, enter the name of the configuration.
The name can contain 1 to 31 alphanumeric characters.
9.
In the Admin Mode list, select Enable or Disable.
Configured Local Users
The number of local users configured.
Authenticated Users
Shows the number of users currently authenticated to all captive portal
instances on this switch.
instances on this switch.
Table 229. Captive Portal Global Configuration
Field
Description