Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch
  5. Administrator's Guide

Netgear M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch Administrator's Guide

Download
Page of 542
  Chapter 6.  RIP
 
   
|
     
83
ProSafe Managed Switch 
d.  Click the gray box under port 3 until T displays. The T specifies that the egress 
packet is tagged for the port.
e.  
Click Apply to save the VLAN that includes port 3.
3. 
Enable RIP on the switch (you can skip this step since the RIP is enabled by default).
a. Select Routing > RIP > Basic > RIP Configuration. A screen similar to the following 
displays.
b.  For RIP Admin Mode, select the Enable radio button.
c.  Click Apply to save the setting.
4. 
Enable RIP on VLANs 10 and 20.
a. Select Routing > RIP > Advanced > RIP Configuration. A screen similar to the 
following displays.
b.  Enter the following information:
•     
In the Interface list, select 0/2/1.
•     
For RIP Admin Mode, select the Enable radio button.
c.  Click Apply to save the settings.