Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
Utility Commands
209
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Power supplies:
Module Failures
------ --------
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
debug i2c
This command displays information about the health and statistics of the i2c bus. The slot
parameter specifies the slot in which a blade is installed.
parameter specifies the slot in which a blade is installed.
Note:
To display the debug trace, enable the
command.
Logging Commands
This section describes the commands you use to configure system logging, and to view logs
and the logging settings.
and the logging settings.
logging buffered
This command enables logging to an in-memory log.
no logging buffered
This command disables logging to in-memory log.
Format
debug i2c slot
Mode
Privileged EXEC
Default
disabled; critical when enabled
Format
logging buffered
Mode
Global Config
Format
no logging buffered
Mode
Global Config