Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
Routing
322
M6100, M5300, and M7100 Series Managed Switches
8.
Use the Route Type field to specify Default or static reject route.
If you are creating a default route, all that must be specified is the next hop IP address;
otherwise, each field must be completed.
otherwise, each field must be completed.
9.
Network Address
displays the IP route prefix for the destination.
10.
Subnet Mask
indicates the portion of the IP interface address that identifies the attached
network.
This is also referred to as the subnet/network mask.
11.
Next Hop IP Address
displays the outgoing router IP address to use when forwarding traffic
to the next router (if any) in the path toward the destination.
The next router is always one of the adjacent neighbors or the IP address of the local
interface for a directly attached network.
interface for a directly attached network.
12.
Preference
displays an integer value from 1 to 255.
You can specify the preference value (sometimes called administrative distance) of an
individual static route. Among routes to the same destination, the route with the lowest
preference value is the route entered into the forwarding database. By specifying the
preference of a static route, the user controls whether a static route is more or less
preferred than routes from dynamic routing protocols. The preference also controls
whether a static route is more or less preferred than other static routes to the same
destination.
individual static route. Among routes to the same destination, the route with the lowest
preference value is the route entered into the forwarding database. By specifying the
preference of a static route, the user controls whether a static route is more or less
preferred than routes from dynamic routing protocols. The preference also controls
whether a static route is more or less preferred than other static routes to the same
destination.
13.
Use Description to specify the description of this route that identifies the route.
The description must consist of alphanumeric, hyphen or underscore characters and can
be up to 31 characters in length.
be up to 31 characters in length.
14.
Click the Add button.
The static route is added to the switch.
15.
To delete the selected static route entry from the switch, click the Delete button.
To refresh the screen with the latest information on the switch, click the Update button.