Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
Manage Device Security
581
M6100, M5300, and M7100 Series Managed Switches
Enabling TCP SYN & FIN DoS prevention causes the switch to drop packets with TCP
flags SYN and FIN set. The factory default is Disable.
flags SYN and FIN set. The factory default is Disable.
24.
Select the Denial of Service UDP Port Disable or Enable radio button.
Enabling UDP Port DoS prevention causes the switch to drop packets with UDP source
port equal to UDP destination port. The factory default is Disable.
port equal to UDP destination port. The factory default is Disable.
Configure an Access Control Profile
To configure the access profile settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Access > Access Control > Access Profile Configuration.
8.
In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.