Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Software Guide
Captive Portal Commands
815
M5300, M6100, and M7100 Series ProSAFE Managed Switches
group
This command assigns a group ID to a captive portal configuration. Each Captive Portal
configuration must contain at least one group ID. The group-id
configuration must contain at least one group ID. The group-id
can have a number in the
1–1024 range. Group ID 1 is the default.
radius-auth-server
Use this command to configure a captive portal configuration RADIUS authentication server.
no radius-auth-server
This command disables a captive portal configuration RADIUS authentication server.
redirect-url mode
This command enables the redirect mode for a captive portal configuration.
Default
guest
Format
verification {guest | local | radius}
Mode
Captive Portal Instance
Default
group-ID 1
Format
group group-id
Mode
Captive Portal Instance
Default
Disable
Format
radius-auth-server server-name
Mode
Captive Portal Instance
Format
no radius-auth-server
Mode
Captive Portal Instance
Default
Disable
Format
redirect-url mode
Mode
Captive Portal Instance