Netgear M4300-52G-PoE+ (GSM4352PB) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) Hardware Manual
Hardware Overview
22
Managed Stackable Switch Series M4300
Hardware Descriptions, M4300 Series Full 10G Models
with RJ45/SFP+ Combo Ports
with RJ45/SFP+ Combo Ports
This section describes the switch hardware features for the following models:
•
M4300-24X. Switch model with twenty copper RJ45 ports and four 10G RJ45/SFP+
combo ports in a half-width chassis
combo ports in a half-width chassis
•
M4300-48X. Switch model with forty-four copper RJ45 ports and four 10G RJ45/SFP+
combo ports in a full-width chassis
combo ports in a full-width chassis
Front Panel, M4300 Series Full 10G Models with RJ45/SFP+
Combo Ports
Combo Ports
The models provide twenty or forty-four independent 10GBASE-T autosensing ports and four
10G RJ45/SFP+ combo ports.
10G RJ45/SFP+ combo ports.
The following figure illustrates the front panel of model M4300-24X.
10GBASE-X SFP+ ports
(one LED per port)
•
Off . No SFP+ module link is established on the fiber port.
•
Solid green . The fiber port established a valid 10 Gbps link.
•
Blinking green . The fiber port is transmitting or receiving packets at 10 Gbps.
•
Solid yellow . The fiber port established a valid 1 Gbps link.
•
Blinking yellow . The fiber port is transmitting or receiving packets at 1 Gbps.
OOB Ethernet port
Left side speed LED:
•
Solid green. A valid 1000 Mbps link is established on the port.
•
Solid yellow. A valid 10/100 Mbps link is established on the port.
•
Off. No link is established on the port.
Right side activity/link LED:
•
Solid green. A valid link is established on the port.
•
Blinking green. The port is transmitting or receiving packets.
•
Off. No link is established on the port.
1. The correct voltage band for EEE 802.1af (PoE) is 44–57 VDC. The correct voltage band for EEE 802.1at (PoE+) is 50–57 VDC.
Table 2. LEDs 1G models with 10G uplinks (continued)
LED
Designation