Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning User Manual
Manage Device Security
546
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Set Up Private VLANs
A private VLAN contains switch ports that cannot communicate with each other, but can
access another network. These ports are called private ports. Each private VLAN contains
one or more private ports and a single uplink port or uplink aggregation group. Note that all
traffic between private ports is blocked at all Layers, not just Layer 2 traffic, but also traffic
such as FTP, HTTP, and Telnet.
one or more private ports and a single uplink port or uplink aggregation group. Note that all
traffic between private ports is blocked at all Layers, not just Layer 2 traffic, but also traffic
such as FTP, HTTP, and Telnet.
Configure a Private VLAN Type
To configure a private VLAN type:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Traffic Control > Private VLAN > Private VLAN Type Configuration.
6.
Use Private VLAN Type to select the type of private VLAN.
The factory default is Unconfigured.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The VLAN ID field specifies the VLAN ID for which the private VLAN type is being set.
The factory default is Unconfigured.
The factory default is Unconfigured.