Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning Software Guide
Utility Commands
266
M4200 and M4300 Series ProSAFE Managed Switches
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
no IP address is specified, the bindings corresponding to all the addresses are displayed.
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools
is displayed.
is displayed.
The following additional field is displayed for Dynamic pool type.
Format
show ip dhcp global configuration
Modes
Privileged EXEC
User EXEC
Term
Definition
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping
Packets
Packets
The maximum number of Ping Packets that will be sent to verify that an ip address id not already
assigned.
assigned.
Conflict Logging
Shows whether conflict logging is enabled or disabled.
BootP Automatic
Shows whether BootP for dynamic pools is enabled or disabled.
Format
show ip dhcp pool configuration {name | all}
Modes
Privileged EXEC
User EXEC
Field
Definition
Pool Name
The name of the configured pool.
Pool Type
The pool type.
Lease Time
The lease expiration time of the IP address assigned to the client.
DNS Servers
The list of DNS servers available to the DHCP client.
Default Routers
The list of the default routers available to the DHCP client
Field
Definition
Network
The network number and the mask for the DHCP address pool.