Netgear M4300-48X (XSM4348CS) - Stackable Switches with Full PoE+ Provisioning Administrator's Guide

c.  In the Host Primary VLAN field, enter 100.

d.  In the Host Secondary VLAN field, enter 102.

e.  Click Apply to save the settings.

The example is shown as CLI commands and as a web interface procedure.

Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN 
(100) and to secondary VLANs (101-102).

Map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to selected 
secondary VLANs (101-102).

a. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous 

Interface Configuration. 

A screen similar to the following displays.

b.  Under Private VLAN Promiscuous Interface Configuration, select the 1/0/1 

interface check box. Now 1/0/1 appears in the Interface field at the top.

c.  In the Promiscuous Primary VLAN field, enter 100.

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/1

(Netgear Switch)  (Interface 1/0/1)#switchport private-vlan mapping 100 101-102

(Netgear Switch)  (Interface 1/0/1)#end