Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual
Routing
314
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Use VLAN ID to specify the VLAN identifier (VID) associated with this VLAN.
The range of the VLAN ID is 1 to 4093.
7.
Use Ports to display selectable physical ports and LAGs (if any).
Selected ports are added to the routing VLAN. Each port has three modes:
•
T (Tagged)
. Select the ports on which all frames transmitted for this VLAN are tagged.
The ports that are selected are included in the VLAN.
•
U (Untagged)
. Select the ports on which all frames transmitted for this VLAN are
untagged. The ports that are selected are included in the VLAN.
•
BLANK(Autodetect)
. Select the ports that can be dynamically registered in this VLAN
through GVRP. This selection has the effect of excluding a port from the selected
VLAN.
VLAN.
8.
Use the LAG Enabled option to add selected ports to VLAN as a LAG.
The default is No.
9.
Use IP Address to define the IP address of the VLAN interface.
10.
Use Network Mask to define the subnet mask of the VLAN interface.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.