Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual
Multicast Routing
447
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > MLD > Proxy Interface Configuration.
6.
In the Interface list, select the interface.
7.
In the Admin Mode list, select Enable or Disable.
This sets the administrative status of MLD proxy on the selected interface. The default is
Disable. Routing, MLD, and Multicast global admin modes must be enabled to enable
MLD proxy interface mode.
Disable. Routing, MLD, and Multicast global admin modes must be enabled to enable
MLD proxy interface mode.
8.
In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds.
The unsolicited report interval is the time between repetitions of a host's initial report of
membership in a group. Valid values are 1 to 260. The default value is 1.
membership in a group. Valid values are 1 to 260. The default value is 1.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Table 177. IPv6 Multicast MLD Proxy Interface Configuration
Field
Description
IPv6 Prefix
The IPv6 address of the MLD proxy interface.
Prefix Length
The prefix length for the IPv6 address of the MLD proxy interface.
Operational Mode
The operational state of MLD proxy interface.
Querier Address on Proxy
Interface
Interface
The querier address on the proxy interface.
Number of Groups
The current number of multicast group entries for the MLD proxy
interface in the cache table.
interface in the cache table.