Netgear M4300-52G-PoE+ (GSM4352PB) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) User Manual
Configure System Information
118
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Address, and, if the values are equal, access is allowed. For example, if the Client
Address and Client IP Mask parameters are 192.168.1.0/255.255.255.0, then any client
Address and Client IP Mask parameters are 192.168.1.0/255.255.255.0, then any client
whose IP address is 192.168.1.0 through 192.168.1.255 (inclusive) is allowed access. To
allow access from only one station, use a Client IP Mask value of 255.255.255.255, and
use that machine's IP address for Client Address.
allow access from only one station, use a Client IP Mask value of 255.255.255.255, and
use that machine's IP address for Client Address.
9.
In the Access mode menu, select Read-Write or Read-Only.
This specifies the access level for this community.
10.
Use Status to specify the status of this community by selecting Enable or Disable.
If you select enable, the Community Name must be unique among all valid Community
Names or the set request are rejected. If you select disable, the Community Name
becomes invalid.
Names or the set request are rejected. If you select disable, the Community Name
becomes invalid.
11.
Click the Add button.
The selected community is added to the switch.
Configure SNMP V1/V2 Trap Settings
To configure the SNMP V1/V2 trap settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > SNMP > SNMP V1/V2 > Trap Configuration.
6.
In the Source Interface list, select the source interface to use for SNMP Trap receiver.