Netgear M4300-52G-PoE+ (GSM4352PB) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) User Manual

Select the Authentication Disable or Enable radio button.

This enables or disables activation of authentication failure traps. The factory default is 
Enable.

Select the Link Up/Down Disable or Enable radio button

This enables or disables activation of link status traps.The factory default is Enable.

Select the Multiple Users Disable or Enable radio button

This enables or disables activation of multiple user traps.The factory default is Enable. 
This trap is triggered when the same user ID is logged into the switch more than once at 
the same time (either through Telnet or the serial port).

Select the Spanning Tree Disable or Enable radio button.

This enables or disables activation of spanning tree traps. The factory default is Enable.

Select the ACL Disable or Enable radio button.

This enables or disables activation of ACL traps. The factory default is Disable.

Select the PoE Disable or Enable radio button.

This enables or disables activation of PoE traps. The factory default is Enable. Indicates 
whether PoE traps are sent. 

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select System > SNMP > SNMP V1/V2 >Supported MIBs.