Netgear M4300-52G-PoE+ (GSM4352PB) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1,000W PSU) User Manual

Use Interface to select the interface.

Use VLAN ID to select the VLAN ID.

In the Multicast Router field, select Enable or Disable.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

IGMP snooping requires that one central switch or router periodically query all end-devices 
on the network to announce their multicast memberships. This central device is the IGMP 
querier. The IGMP query responses, known as IGMP reports, keep the switch updated with 
the current multicast group membership on a port-by-port basis. If the switch does not 
receive updated membership information in a timely fashion, it stops forwarding multicasts to 
the port where the end device is located.

You can configure and display information on IGMP snooping queriers on the network and, 
separately, on VLANs.

You can configure the parameters for IGMP snooping querier. Only a user with read/write 
access privileges can change the data on this page. 



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.