Netgear GSM7248v2 - ProSAFE 48 Port Layer 2 Gigabit L2 Ethernet Switch Administrator's Guide
220
|
Chapter 13. IGMP Snooping and Querier
ProSafe 7000 Managed Switch Release 8.0.3
Web Interface: Configure the Switch with an External Multicast
Router
Router
1.
Select Switching > Multicast > Multicast Router Configuration. A screen similar to
the following displays.
the following displays.
2.
Under Multicast Router Configuration, scroll down and select the Interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
Now 1/0/3 appears in the Interface field at the top.
3.
In the Multicast Router field, select Enable.
4.
Click Apply.
Multicast Router Using VLAN
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure the Switch with a Multicast Router Using VLAN
This example configures the interface to forward only the snooped IGMP packets that come
from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.
from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.
(Netgear Switch)(Interface 1/0/3)# set igmp mrouter 2