Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. M6100 – Campus Edge and SMB Core Chassis Switches
  5. Software Guide

Netgear M6100 – Campus Edge and SMB Core Chassis Switches Software Guide

Download
Page of 764
Routing 
360
M6100, M5300, and M7100 Series Managed Switches 
8. 
Use VLAN ID to specify the VLAN identifier (VID) associated with this VLAN. 
The range of the VLAN ID is 1 to 4093.
9. 
Use Ports to display selectable physical ports and LAGs (if any). 
Selected ports are added to the routing VLAN. Each port has three modes:
•
T (Tagged)
. Select the ports on which all frames transmitted for this VLAN are tagged. 
The ports that are selected are included in the VLAN.
•
U (Untagged)
. Select the ports on which all frames transmitted for this VLAN are 
untagged. The ports that are selected are included in the VLAN.
•
BLANK(Autodetect)
. Select the ports that can be dynamically registered in this VLAN 
through GVRP. This selection has the effect of excluding a port from the selected 
VLAN.
10. 
Use the LAG Enabled option to add selected ports to VLAN as a LAG. 
The default is No.
11. 
Use IP Address to define the IP address of the VLAN interface.
12. 
Use Network Mask to define the subnet mask of the VLAN interface.
13. 
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
Configure VLAN Routing 
To configure VLAN routing: 
1. 
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.
2. 
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.
3. 
Launch a web browser.