Netgear XS716E – ProSAFE® 10-Gigabit Ethernet Web Managed (Plus) Switch User Manual
Network Settings
21
ProSAFE 10-Gigabit Ethernet Web Managed Switch
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
6.
Enter the IP address, subnet mask, and if available, the gateway address.
7.
Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Switch IP Address
To specify IP address settings for a switch:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
off-network using an Ethernet cable.
2.
Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
the local network.
3.
Select the switch.
If you do not see the switch, click the REFRESH button.
4.
Click the APPLY button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6.
Click the IP Setting button.
Note:
To navigate to this page, select Network, select the switch, and click
the IP Setting button.
the IP Setting button.
7.
In the DHCP Mode menu, select Disable.
The IP Address, Subnet Mask, and Gateway Address fields are enabled.