Netgear GS716Tv2 - ProSAFE 16-Port Gigabit Managed Switch Administrator's Guide
217
GS716T and GS724T Gigabit Smart Switches
•
Type. Identifies the ACL as either a standard or extended IP ACL.
2.
To delete an IP ACL, select the check box next to the IP ACL ID field, then click Delete.
3.
To change the name of an IP ACL, select the check box next to the IP ACL ID field, update
the name, then click Apply.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Note:
To configure a rule for an existing IP ACL, click its ID in the IP ACL
Table. The IP ACL ID is a hyperlink to the rule configuration page for
the ACL type.
Table. The IP ACL ID is a hyperlink to the rule configuration page for
the ACL type.
IP Rules
Use the IP Rules page to define rules for IP-based standard ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded.
Note:
There is an implicit “deny all” rule at the end of an ACL list. This
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit “deny all” rule applies and the
packet is dropped.
means that if an ACL is applied to a packet and if none of the explicit
rules match, then the final implicit “deny all” rule applies and the
packet is dropped.
To display the IP Rules page, click Security
ACL, then click the Advanced
IP Rules link.