Netgear M4100-50G-POE+ (GSM7248Pv1h1) - 46‐port GE + 4 GE Combo L2 Managed PoE+ Switch User Manual

Page of 446
Configure System Information 
68
M4100 Series Managed Switch 
Specific Address Conflict to specify a dynamic binding.
The following table describes the DHCP Conflicts Information fields.
Table 19.  DHCP conflicts information 
 
Field
Description
IP Address
Specifies the IP Address of the host as recorded on the DHCP server.
Detection Method
Specifies the manner in which the IP address of the hosts were found 
on the DHCP server.
Detection Time
Specifies the time when the conflict was detected in N days 
NNh:NNm:NNs format with respect to the system up time.
Configure the DHCP Relay
To configure the DHCP relay:
1. 
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.
2. 
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.
3. 
Launch a web browser.
4. 
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100. 
The Login screen displays.
5. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
6. 
Click the Login button. 
The web management interface menu displays.