Manualsbrain.com
  1. Manuals
  2. Brands
  3. Netgear
  4. M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3
  5. User Manual

Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 User Manual

Download
Page of 700
Routing 
281
 M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the Routing IP Settings
You can configure routing IP settings for the switch, as opposed to the IP settings for an 
interface.
To configure the routing IP settings: 
1. 
Launch a web browser.
2. 
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
4. 
Click the Login button. 
The System Information page displays.
5. 
Select Routing
> IP > Basic > IP Configuration.
6. 
Use Routing Mode to select Enable or Disable. 
You must enable routing for the switch before you can route through any of the 
interfaces. The default value is Disable.
7. 
Use ICMP Echo Replies to select Enable or Disable. 
If you select Enable, then only the router can send ECHO replies. By default ICMP Echo 
Replies are sent for echo requests.
8. 
Use ICMP Redirects to select Enable or Disable.
If this is enabled globally and on an interface level, then only the router can send ICMP 
Redirects.
9. 
Use ICMP Rate Limit Interval to control the ICMP error packets by specifying the number 
of ICMP error packets that are allowed per burst interval.