Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 User Manual
Maintenance and Troubleshooting
672
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
4.
Click the Login button.
The System Information page displays.
5.
Select Maintenance > Troubleshooting > Traceroute IPv6.
6.
In the IPv6 Address/Hostname field, enter the IPv6 address or host name of the station to
which you want the switch to discover a path.
The initial value is blank. The IPv6 address or host name you enter is not retained across
a power cycle.
a power cycle.
7.
Enter the Probes Per Hop.
The default value is 3. The range is 1 to 10.
8.
Enter the Maximum TTL for the destination.
The default value is 30. The range is 1 to 255. The MaxTTL you enter is not retained
across a power cycle.
across a power cycle.
9.
Enter the Initial TTL to be used.
The default value is 1. The range is 1 to 255. The InitTTL you enter is not retained across
a power cycle.
a power cycle.
10.
Enter the Maximum Failures allowed in the session.
The default value is 5. The range is 1 to 255. The MaxFail you enter is not retained across
a power cycle.
a power cycle.
11.
Interval (secs)
- Enter the time between probes in seconds.
The default value is 3. The range is 1 to 60. The interval that you enter is not retained
across a power cycle.
across a power cycle.
12.
Enter the UDP Destination Port in probe packets.