Netgear M4100-26-POE (FSM7226Pv1h1) - 24‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide
Utility Commands
373
M4100 Series ProSAFE
Managed
Switches
Parameters for the copy command are listed in the following table.
Table 1.
Parameters for the copy command
Source
Destination
Description
nvram:techsupport
<url>
Uploads the Technical Support file.
nvram:backup-config
nvram:startup-config
Copies the backup configuration to the
startup configuration.
startup configuration.
nvram:clibanner
<url>
Copies the CLI banner to a server.
nvram:cpupktcapture.pcap
<url>
Uploads the CPU packets capture file.
nvram:errorlog
<url>
Copies the error log file to a server
nvram:log
<url>
Copies the log file to a server.
nvram:script <scriptname> <url>
Copies a specified configuration script
file to a server.
file to a server.
nvram:startup-config
nvram:backup-config
Copies the startup configuration to the
backup configuration.
backup configuration.
nvram:startup-config
<url>
Copies the startup configuration to a
server.
server.
nvram:traplog
<url>
Copies the trap log file to a server.
system:running-config
nvram:startup-config
Saves the running configuration to
nvram.
nvram.
<url>
nvram:clibanner
Downloads the CLI banner to the
system.
system.
<url>
nvram:script
<destfilename>
Downloads a configuration script file to
the system. During the download of a
configuration script, the copy command
validates the script. In case of any error,
the command lists all the lines at the end
of the validation process and prompts
you to confirm before copying the script
file.
the system. During the download of a
configuration script, the copy command
validates the script. In case of any error,
the command lists all the lines at the end
of the validation process and prompts
you to confirm before copying the script
file.
<url>
nvram:script
<destfilename> noval
When you use this option, the copy
command does not validate the
downloaded script file. An example of
the CLI command follows:
command does not validate the
downloaded script file. An example of
the CLI command follows:
(NETGEAR Switch) #copy
tftp://1.1.1.1/file.scr
nvram:script file.scr
<url>
nvram:sshkey-dsa
Downloads an SSH key file. For more
information, see
information, see
<url>
nvram:sshkey-rsa1
Downloads an SSH key file.
<url>
nvram:sshkey-rsa2
Downloads an SSH key file.