Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch User Manual

Page of 446
Configure System Information 
34
M4100 Series Managed Switch 
8. 
Use the Loopback ID field to select list of currently configured loopback interfaces.
9. 
Use the Primary IP Address field to input the primary IPv4 address for this interface in 
dotted decimal notation. 
This option is visible only when IPv4 loopback is selected.
10. 
Use the Primary IP Subnet Mask field to input the primary IPv4 subnet mask for this 
interface in dotted decimal notation. 
This option is visible only when IPv4 Loopback is selected.
The loopback Interface Status indicates whether the link is up or down.
11. 
To create secondary loopback interfaces, use the Secondary IP Address field to input the 
secondary IP address for this interface in dotted decimal notation. 
This input field is visible only when Add Secondary is selected. This option is visible 
when IPv4 Loopback is selected.
12. 
Use the Secondary Subnet Mask field to input the secondary subnet mask for this interface 
in dotted decimal notation. 
This input field is visible only when Add Secondary is selected. This option is visible 
when IPv4 Loopback is selected.
View the IPv6 Network Neighbor Table
To display the IPv6 Network Neighbor Table:
1. 
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.
2. 
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.
3. 
Launch a web browser.
4. 
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100. 
The Login screen displays.
5. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
6. 
Click the Login button. 
The web management interface menu displays.