KitchenAid 30-Inch 5-Element Electric Freestanding Range, Architect® Series II Use & Care Manual

Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off. Exposure to the fumes may result in death to certain 
birds. Always move birds to another closed and well-ventilated room.

The display will flash when powered up or after a power loss. Press 
OFF to clear. When oven is not in use, the time of day is displayed.

Tones are audible signals, indicating the following:
One tone

■

Valid pad press

■

Oven is preheated (long tone)

■

Function has been entered

■

Reminder (on some models), repeating each minute after the 
end-of-cycle tones

■

Invalid pad press

■

End of cycle

Use the Options key to change the tone settings.

Many features of the oven control can be adjusted to meet your 
personal needs. These changes are made using the Options key.
Use the Options key to scroll through the features that can be 
changed. Each press of the Options key will advance the display to 
the next setting. After selecting the feature to be changed, the 
control will prompt you for the required input. After the setting is 
saved by pressing Start, the control will exit Options and display 
the time of day. Details of all of the feature changes are explained in 
the following sections.
Press OFF to exit Options.

The temperature is preset at Fahrenheit, but can be changed to 
Celsius. 
To change: 
1. Press OPTIONS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Turns off all tones, including the end of cycle tone and key press 
tones. Reminder tones are still active when all tones are disabled.
1. Press OPTIONS until “SOUNDS” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Sets the pitch of the tone to either high or low.
1. Press OPTIONS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Turns off the short repeating tone that sounds every 1 minute after 
the end of cycle tones.
1. Press OPTIONS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

1. Press OPTIONS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

IMPORTANT: This feature is intended for use on the sales floor 
with 120 V power connection and permits the control features to be 
demonstrated without heating elements or burners turning on. If 
this feature is activated, the oven will not work.
1. Press OPTIONS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.