KitchenAid 30" Concave Glass Wall Mount Range Hood Dimensional Illustrations

Because Whirlpool Corporation includes a continues commitment to improve our 
products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation 
Instructions packed with product. Specifications subject to change without notice.

Page 2 of 2

Ref. W10836369A

05/09/2016

If it is not possible to vent cooking fumes and vapors to the outside, 

the hood can be used in the non-vented (recirculating) version, fitting a 

charcoal filter and the deflector. Fumes and vapors are recycled through 

the top grille.

To calculate the length of the system you need, add the equivalent feet 

(meters) for each vent piece used in the system.

45° elbow

2.5 ft (0.8 m)

90° elbow

5 ft (1.5 m)

Maximum equivalent vent length is 35 ft (10.7 m).

The following example falls within the maximum recommended vent 

length of 35 ft (10.7 m).

1 - 90° Elbow

= 5 ft (1.5 m)

1 - Wall cap

= 0 ft (0 m)

8 ft (2.4 m) straight

= 8 ft (2.4 m)

Length of system

= 13 ft (3.9 m)

This canopy hood is factory set for venting through the roof or wall.
A 6" (15.2 cm) round vent system is needed for installation (not included). 

The hood exhaust opening is 6" (15.2 cm) round.
NOTE: Flexible vent is not recommended. Flexible vent creates back 

pressure and air turbulence that greatly reduce performance.
Vent system can terminate either through the roof or wall. To vent 

through a wall, a 90° elbow is needed.

A 90° elbow may be installed immediately above the hood.