KitchenAid 36" Convertible Wall-Mount 400-CFM Glass Canopy Hood Use & Care Manual

Page of 28
10
2.  Secure the bottom of the duct with (2) 4.2 x 8 mm screws.
Complete Installation
1.  For non-vented (recirculating) installations only, install 
charcoal filters over metal grease filter. See the “Range 
Hood Care” section.
2.  Install metal filters. See the “Range Hood Care” section.
3.  Check the operation of the range hood blower and light. 
See the “Range Hood Use” section.
NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking 
vapors and odors from the cooktop area. For best results, 
start the hood before cooking and allow it to operate several 
minutes after the cooking is complete to clear all smoke and 
odors from the kitchen.
The hood controls are located on the front side of the canopy.
Range Hood Controls
Operating the light
The On/Off light button controls both lights. Press once 
for On and again for Off.
Operating the blower
The Blower Speed buttons turn the blower On and control the 
blower speed and sound level for quiet operation. The speed 
can be changed anytime during fan operation by pressing the 
desired Blower Speed button.
The Blower Off button turns the blower Off.
A
B
C
D
E
F
G
H
A.  Duct cover holes
B.  Duct cover
C.  Control panel
D.  Glass canopy
E.  Grease filter
F.  Lamp cover
G. Incandescent lamp 
(position and number 
of lamps may vary)
H.  Grease filter release handle
A
B
C
D
E
A.  Blower speed maximum button 
B.  Blower speed medium button 
C.  Blower speed minimum button
D.  Blower off button
E.  On/Off light button