Craftsman PGA230SU User Manual
10
9
1. Remove the grinder from the carton and inspect it carefully to make sure
that no breakage or damage has occurred during shipping.
2. Do not discard any of the packing materials until all parts are accounted for.
3. Two Grinding Discs are included.
4. If any of the parts are damaged or missing (refer to PARTS LIST below), return
2. Do not discard any of the packing materials until all parts are accounted for.
3. Two Grinding Discs are included.
4. If any of the parts are damaged or missing (refer to PARTS LIST below), return
the grinder for replacement to the retailer from which it was purchased.
Help minimize your vibration risk exposure:
Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
WARNING:
Your tool should NEVER be connected to the power source
when you are assembling parts, making adjustments, installing or removing
grinder discs, cleaning or when it is not in use. Disconnecting the tool will
prevent accidental starting, which could cause serious personal injury.
!
WARNING:
This tool produces vibration during operation which may cause
numbness or other injury to the hands of some users.
!
WARNING:
This tool is equipped with a disc guard that is ONLY safe for
grinding operation. The guard is NOT safe for cutting operation. Using this tool for
cutting operation will create a hazard that can result in serious personal injury.
!
UNPACKING / DESCRIPTION
PARTS LIST (Fig. 1)
1. Spindle lock button
2. Handle rotation button
3. Lock-off switch
4. Brush cover
5. Grinding disc guard
6. Grinding Disc
7. Spanner
8. Standard outer flange
9. Inner flange
10. Clamp adjustment screw
11. Spindle
12. Guard clamping lever
13. Anti-vibration auxiliary handle
14. Tool-less outer flange
INCLUDED ACCESSORIES
- Anti-vibration auxiliary handle
- Spanner
- (2) Grinding discs
- Grinding disc guard
- Tool-less outer flange
- Spanner
- (2) Grinding discs
- Grinding disc guard
- Tool-less outer flange
OPERATION
NOTE
: Always refer back to these PARTS LIST numbers for product call-outs
and operation reference.
8.
9.
14.
11.
12.
10.
TECHNICAL DATA
Rated
Voltage
120 V ~ 60 Hz
Rated power input
15 A
No
load
speed
6500/min
Diameter of grinding discs 230mm
Disc
Disc
size 9 ’’
Disc
bore 7/8’’
Spindle
thread
5 /8’’- 11
Machinery weight
9.7 lb / 4.4 kg
Protection degree
/ II
Cord length
10 ft
To be accurate, an estimation of vibration exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle but not actually doing the job.
This may significantly reduce the exposure level over the total working period.
This may significantly reduce the exposure level over the total working period.
VIBRATION HAZARD
13.
6.
2.
1.
3.
4.
5.
IMPORTANT: This product comes with 2 Outer Flanges:
Tool-less and Standard,
for operator’s preference.
DO NOT USE both flanges during operation.
7.