Craftsman CLHT2422S-N User Manual

11 ― English

Before attempting to use this charger, 

become familiar with all of its operating 

features and safety requirements.

■ Do not use other battery chargers. The 

battery charger supplied is specifically 

designed for the Lithium-Ion battery used in 

this garden appliance. 

■ Check the main power supply! The voltage 

of the power supply must correspond with the 

data on the nameplate of the battery charger. 

Battery chargers operate on 120V. 

■ The battery is equipped with a temperature 

monitor that allows charging only within a 

temperature range between 23

o

F and 122

o

F. 

This ensures an optimum battery service life. 

   

■ If any part of the charger is missing or 

damaged, do not operate it! Replace the 

charger with a new one. Failure to heed this 

warning could result in possible serious injury.

■ Check the voltage! The voltage must 

comply with the information on the rating 

label.

BATTERY CHARGING PROCEDURE 
■ Align the battery pack to the slots on the 

charger and slide it in until it locks in place.

■ Connect the charger to the power supply.

■ Allow sufficient charging time (see Product 

Specifications), and then disconnect the 

charger from the power supply.

■ Press the release button on the battery 

pack and remove it from the charger.

 It is normal for the battery pack and 

charger to become warm (but not hot) during 

charging process. If the battery does not 

charge properly, check to make sure the 

electrical outlet is "live". 

Always charge the battery before storage! 

 The battery is supplied partially 

charged. To ensure full capacity of the 

battery, charge the battery in the battery 

charger before using the product for the first 

time. The Lithium-Ion battery can be charged 

at any time without reducing its service life. 

Interrupting the charging procedure does not 

affect the battery.

   

To reduce risk of fire, never 

leave the battery connected with the charger 

for more than 24 hours!

CHARGER INDICATORS
■ 

Preparation: The charging process starts 

as soon as the battery charger is plugged 

into a power supply socket and the battery is 

inserted into the charger.

■ If the battery is not inserted, 

red light indicates that the charger is plugged 

into a power supply socket and is now ready 

to begin charging.

■ 

Charging: a flashing green LED on the 

charger indicates that the battery is charging 

normally.

■ 

Charged: continuous green LED on the 

charger indicates that the battery is ready for 

use.

■ The indicator lights on the charger show 

the charger status:

red, 

blinking

charging problem; 

see Technical Issue

red, 

continuous

connected to power 

supply

green, 

blinking

charging

green, 

continuous fully charged