Honeywell TH5110D Installation Guide

FocusPRO

®

5000

 

Series

Non-Programmable  
Digital  
Thermostat

M29368

Wallplate installation

Remove the wallplate from the thermostat, 

then follow directions below for mounting.
1.  Remove battery holder.

2.  Pull here to remove wallplate from new 

thermostat.

3.  Pull wires through wire hole.

4.  Position wallplate on wall, level and mark 

hole positions with pencil.

5.  Drill holes at marked positions as shown 

below, then tap in supplied wall anchors.

6.  Place wallplate over anchors, insert and 

tighten mounting screws.

M29369

Drill 7/32" 

holes for 

plaster.

Drill 3/16" 

holes for 

drywall.

Wire hole

Mounting 

screws