Zanussi ZEM6732FBA User Manual

The hob deactivates.

You put something on the sensor
field  .

Remove the object from the sen-

sor field.

Residual heat indicator does not

come on.

 The zone is not hot because it

operated only for a short time.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.

Automatic Heat Up function does

not operate.

The zone is hot.

Let the zone become sufficiently

cool.

 

The highest heat setting is set.

The highest heat setting has the

same power as the function.

The heat setting changes be-

tween two levels.

Power management function op-

erates.

Refer to "Daily use" chapter.

The sensor fields become hot.

The cookware is too large or you

put it too near to the controls.

Put large cookware on the rear

zones if possible.

 comes on.

Automatic Switch Off operates.

Deactivate the hob and activate it

again.

 comes on.

The Child Safety Device or the

Lock function operates.

Refer to "Daily use" chapter.

 comes on.

There is no cookware on the

zone.

Put cookware on the zone.

 

The cookware is incorrect.

Use the correct cookware.

Refer to “Hints and tips” chapter.

 

The diameter of the bottom of the

cookware is too small for the

zone.

Use cookware with correct di-

mensions.

Refer to “Technical information”

chapter.

 and a number come on.

There is an error in the hob.

Disconnect the hob from the

electrical supply for some time.

Disconnect the fuse from the

electrical system of the house.
Connect it again. If   comes on

again, speak to an Authorised

Service Centre.