Zanussi ZSG25224XA User Manual

Refer to Safety chapters.

Do not block the air vents. If you do

that, the appliance can overheat.

Do not connect the appliance to

adapters or extension leads. This

can cause overloading and risk of

fire.

The minimum installation height is

85 cm.

• The microwave is for built-in use only. It must

be placed on a stable and flat surface.

• The cabinet can not have a back wall in the

place where the microwave is located.

• Put the microwave far away from steam, hot

air and water splashes.

• If the microwave is to close to the TV and

radio it may cause interference in the

received signal.

• If you transport the microwave in cold

weather, do not activate it immediately after

the installation. Let is stand in the room

temperature and absorb the heat.

Only a qualified person must do the

electrical installation.

The manufacturer is not responsible

if you do not follow the safety

precautions from the chapter "Safety

Information".

This microwave is supplied with a main cable

and main plug.
The cable has an earth wire with an earthing

plug. The plug must be plugged into an outlet

that is properly installed and earthed. In the

event of an electrical short circuit, earthing

reduces the risk of electric shock.

1. Check if the dimensions of the furniture

meet the installation distances.

Installation distances

A

380 + 2

B

560 + 8

C

500

D

20

2. If the cabinet depth is over 300 mm, put the

template on the bottom of cabinet and

check if it fits. If yes, mark the spots for

screws. Remove the template and fix the

bracket with the screws in the marked spot.

Skip this step if the cabinet

depth is 300 mm.