Zanussi ZSG25224XA User Manual

Page of 124
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the
appliance. Do not remove the rating plate from
the appliance.
We recommend that you write the data
here:
Model (MOD.)
........................................
We recommend that you write the data
here:
Product number
(PNC)
........................................
Serial number (S.N.)
........................................
Installation
WARNING!
Refer to Safety chapters.
General Information
CAUTION!
Do not block the air vents. If you do
that, the appliance can overheat.
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
CAUTION!
The minimum installation height is
85 cm.
• The microwave is for built-in use only. It must
be placed on a stable and flat surface.
• Put the microwave far away from steam, hot
air and water splashes.
• If the microwave is to close to the TV and
radio it may cause interference in the
received signal.
• If you transport the microwave in cold
weather, do not activate it immediately after
the installation. Let is stand in the room
temperature and absorb the heat.
Electrical installation
WARNING!
Only a qualified person must do the
electrical installation.
The manufacturer is not responsible
if you do not follow the safety
precautions from the chapter "Safety
Information".
This microwave is supplied with a main cable
and main plug.
The cable has an earth wire with an earthing
plug. The plug must be plugged into an outlet
that is properly installed and earthed. In the
event of an electrical short circuit, earthing
reduces the risk of electric shock.
Installing the microwave
1. Check if the dimensions of the furniture
meet the installation distances.
D
B
A
C
32
www.zanussi.com