Zanussi ZDV14002FA User Manual

Do not use detergent and do not load the

baskets.

When you start a programme, the appliance can

take up to 5 minutes to recharge the resin in the

water softener. It seems that the appliance is not

working. The washing phase starts only after this

procedure is completed. The procedure will be

repeated periodically.

CAUTION! Only use salt specifically

designed for dishwashers.

The salt is used to recharge the resin in the water

softener and to assure good washing results in the

daily use.

Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after

you fill the salt container, start a programme.

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot

rinse phase.

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in user mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill the rinse

aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the

type of load and the degree of soil.