Zanussi ZBB28441SA User Manual

Temperature is set incorrect-

ly.

Refer to "Operation" .

Water flows on the rear plate

of the refrigerator.

During the automatic de-

frosting process, frost melts

on the rear plate.

This is correct.

Water flows inside the refriger-

ator.

The water outlet is clogged.

Clean the water outlet.

Food products prevent that

water flows into the water

collector.

Make sure that food products do

not touch the rear plate.

Water flows on the floor.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

Attach the melting water outlet to

the evaporative tray.

The temperature in the appli-

ance is too low/too high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tempera-

ture is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Many food products are stor-

ed at the same time.

Store less food products at the

same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened

often.

Open the door only if necessary.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead to the

desired result, contact the nearest

Authorised Service Centre.

CAUTION! Disconnect the plug from

the mains socket.

1. Pull the left side of the lamp cover with your

fingers to unlock it. Remove the cover by

pulling it towards yourself.

2. Replace the lamp with one of the same power

and shape, specifically designed for household

appliances. The maximum power is shown on

the light bulb cover.

3. Install the lamp cover.

4. Connect the plug to the mains socket.