Zanussi ZOE35511XK User Manual

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

Refer to Safety chapters.

The cooking zones do not oper-

ate.

Refer to the operating instructions for the built-in cooking surface.

You cannot activate or operate

the oven. The display shows

“400” and an acoustic signal

sounds.

The oven is incorrectly connec-

ted to an electrical supply.

Check if the oven is correctly

connected to the electrical sup-

ply (refer to the connection dia-

gram if available).

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

The display shows "12.00".

There was a power cut.

Reset the clock.