Zanussi ZCG43330WA User Manual

The lamp glass cover is at the back

of the cavity.

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300

°C heat-resistant oven lamp. 

Use the same oven lamp type.

4. Install the glass cover.

Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is correct-

ly connected to the electrical

supply.

You cannot activate the appli-

ance.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

You cannot activate the appli-

ance.

The appliance is too hot.

Wait for the appliance to cool

down.

The burners do not work.

There is no gas supply.

Check the gas connection.

There is no spark when you try to

activate the spark generator.

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

The flame colour is orange or yel-

low.

 

The flame can look orange or yel-

low in some areas of the burner.

This is normal.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The lamp does not operate.

The lamp is defective.

Replace the lamp.