Zanussi ZCI660MWC User Manual

Page of 28
To deactivate the function: set the cooking zone
with   and touch 
 or 
. The indicator of the
cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows  .
To activate the function: touch  . Touch 
 or
 of the timer to set the time. Cooking zones
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch  .
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate to
the lowest heat setting.
The function does not stop the timer functions.
To activate the function: touch 
.   comes
on.
To deactivate the function: touch 
. The
previous heat setting comes on.
If you change the heat setting, the
function stops and the display shows
the new heat setting.
LOCK
You can lock the sensors on the hob while cooking
zones operate.
Set the heat setting first.
To activate the function:
 touch  .   comes
on for 4 seconds. The Timer stays on.
To deactivate the function: touch  . The
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental operation of
the hob.
To activate the function: the hob must be
deactivated. Touch   until   flashes. Touch 
.
 comes on for 4 seconds.
To deactivate the function: the hob must be
deactivated. Touch   until   flashes. Touch 
.
 comes on for 4 seconds.
To override the function for only one cooking
time:
 activate the cooking zone.   comes on.
Touch   until   comes on. Set the heat
setting in 4 seconds. You can operate the hob.
When you deactivate the appliance the function
operates again.
POWER MANAGEMENT FUNCTION
• All cooking zones are connected to one phase.
See the illustration.
• The phase has a maximum electricity load.
• The function divides the power between
cooking zones.
• The function activates when the total electricity
load of the cooking zones is exceeded.
• The function decreases the power to the other
cooking zones.
• The heat setting display of the reduced zones
changes between two levels.
10