Zanussi ZCV460TCWA User Manual

A

2

B

685

Use small feet on the bottom of appliance to set the

appliance top surface level with other surfaces.

WARNING! The manufacturer is not

responsible if you do not follow the

safety precautions from Safety

chapters.

This appliance is supplied without a main plug or a

main cable.

• The recommended cross-section area is six

square millimetres (6 mm²).

• When you refit the mains terminal cover, make

sure that the lower tabs are located inside the

bottom edge of the aperture, before you fix the

two screws into the top edge of the mains

terminal cover.

• Make sure that the cover is securely fastened.

To open the cover of terminal board

obey the procedure in opposite

sequence.

Do not remove blanking plates.

Make sure that the links are fitted as shown.

N

N

N

L

L