Zanussi ZCK68300B User Manual

Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is correct-

ly connected to the electrical

supply.

You cannot activate the appli-

ance.

The fuse is released.

Make sure that the fuse is the

cause of the malfunction. If the

fuse releases again and again,

contact a qualified electrician.

The burners do not work.

There is no gas supply.

Check the gas connection.

There is no spark when you try to

activate the spark generator.

Burner cap and crown are placed

incorrectly.

Place the burner cap and crown

correctly.

The flame extinguishes immedi-

ately after ignition.

Thermocouple is not heated up

sufficiently.

After lightning the flame, keep the

knob pushed for equal or less

than 10 seconds.

The flame ring is uneven.

Burner crown is blocked with

food residues.

Make sure that the injector is not

blocked and the burner crown is

clean.

The oven does not heat up.

The oven is deactivated.

Activate the oven.

The oven does not heat up.

The clock is not set.

Set the clock.

The oven does not heat up.

The necessary settings are not

set.

Make sure that the settings are

correct.

The lamp does not operate.

The lamp is defective.

Replace the lamp.

The display shows "12.00".

There was a power cut.

Reset the clock.

Steam and condensation settle

on the food and in the cavity of

the oven.

You left the dish in the oven for

too long.

Do not leave the dishes in the

oven for longer than 15 - 20 mi-

nutes after the cooking process

ends.

If you cannot find a solution to the problem

yourself, contact your dealer or an Authorised

Service Centre.

The necessary data for the service centre is on

the rating plate. The rating plate is on the front

frame of the appliance cavity. Do not remove

the rating plate from the appliance cavity.