Zanussi ZEE6140FWA User Manual

Off position

Heat settings

There is a risk of burns from residual

heat.

Refer to Safety chapters.

Put cookware containing water on each cooking

zone, set the maximum position and operate the

hob for 10 min. This is to burn off the residue in

the appliance. After that, operate the hob at

minimum position for 20 min. During this period,

an odour and smoke can occur. This is normal.

Make sure that the airflow is sufficient.

A red dot in the middle of the plate shows a

rapid hot plate. A rapid hot plate heats up faster

than usual plates. The red dots are painted on

the plates. They can deteriorate during use and

even disappear completely after a period of

time. It does not have an effect on the

performance of the hob.

To set or change the heat setting turn the knob

to the correct heat setting. To deactivate turn

the knob to off position.
Power indicator activates when one or more

cooking zones are activated. When you

deactivate the cooking zones the indicator

deactivates.

Refer to Safety chapters.

The bottom of the cookware must be

as thick and flat as possible.

Do not use cast iron pans,

potstones, earthenware, grill or

toaster plates. The stainless steel

can become tarnished if it is too

much heated.

1

Keeping warm

2

Gentle simmering

3

Simmering

4

Frying / browning

5

Bringing to the boil

6

Bringing to the boil / quick frying /

deep-frying