Zanussi ZEL6640FBV User Manual

To see the remaining time: set the cooking
zone with  . The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.
To deactivate the function: set the cooking
zone with   and touch  . The remaining time

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch  .
Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate. The heat setting display
shows  .

To activate the function: touch  . Touch 
or   of the timer to set the time. When the

time comes to an end, the sound operates and 

00 flashes.

To stop the sound: touch  .

The function has no effect on the

operation of the cooking zones.

You can lock the control panel while cooking

zones operate. It prevents an accidental change

of the heat setting.
Set the heat setting first.

To activate the function: touch  . 

comes on for 4 seconds. The Timer stays on.

To deactivate the function: touch  . The

previous heat setting comes on.

When you deactivate the hob, you

also deactivate this function.

This function prevents an accidental operation

of the hob.
To activate the function: activate the hob
with  . Do not set the heat setting. Touch 

for 4 seconds.   comes on. Deactivate the
hob with  .
To deactivate the function: activate the hob
with  . Do not set the heat setting. Touch 
for 4 seconds.   comes on. Deactivate the
hob with  .
To override the function for only one
cooking time: activate the hob with  . 
comes on. Touch   for 4 seconds. Set the

heat setting in 10 seconds. You can operate
the hob. When you deactivate the hob with 

the function operates again.

• Cooking zones are grouped according to the

location and number of the phases in the

hob. See the illustration.

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power between

cooking zones connected to the same

phase.

• The function activates when the total

electricity loading of the cooking zones

connected to a single phase exceeds 3700

W.

• The function decreases the power to the

other cooking zones connected to the same

phase.

• The heat setting display of the reduced

zones changes between two levels.