Zanussi ZRB38213WA User Manual

To achieve sufficient ventilation follow the in-
structions relevant to installation.

• Wherever possible the back of the product

should be against a wall to avoid touching or
catching warm parts (compressor) to prevent
possible burn.

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

• Connect to potable water supply only (If a

water connection is foreseen).

• Any electrical work required to do the servic-

ing of the appliance should be carried out by
a qualified electrician or competent person.

• Do not remove the LED light cover. Contact

the nearest After Sales Service Force to re-
place the LED light board, if it is necessary.

• This product must be serviced by an author-

ized Service Centre, and only genuine spare
parts must be used.

This appliance does not contain gasses
which could damage the ozone layer, in ei-

ther its refrigerant circuit or insulation materials.
The appliance shall not be discarded together
with the urban refuse and rubbish. The insula-
tion foam contains flammable gases: the appli-
ance shall be disposed according to the appli-
cable regulations to obtain from your local au-
thorities. Avoid damaging the cooling unit, espe-
cially at the rear near the heat exchanger. The
materials used on this appliance marked by the
symbol 

 are recyclable.