Zanussi ZFT11105WA User Manual

The appliance does not operate.

The appliance is switched off.

Switch on the appliance.

 

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

 

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket. Con-

tact a qualified electrician.

The appliance is noisy.

The appliance is not supported

properly.

Check if the appliance stands

stable.

The compressor operates contin-

ually.

Temperature is set incorrectly.

Refer to "Operation" chapter.

 

Many food products to be frozen

were put in at the same time.

Wait some hours and then check

the temperature again.

 

The room temperature is too

high.

Refer to climate class chart on

the rating plate.

 

Food products placed in the ap-

pliance were too warm.

Allow food products to cool to

room temperature before storing.

The door is not closed correctly.

Refer to "Closing the door".

There is too much frost and ice.

The door is not closed correctly

or the gasket is deformed/dirty.

Refer to "Closing the door".

The water drainage plug is not

correctly positioned.

Position the water drainage plug

in the correct way.

Food products are not wrapped

properly.

Wrap the food products better.

Temperature is set incorrectly.

Refer to "Operation" chapter.

Door is misaligned or interferes

with ventilation grill.

The appliance is not levelled.

Refer to "Levelling".

The temperature in the appliance

is too low/too high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

The door is not closed correctly.

Refer to "Closing the door".

The food products' temperature

is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Many food products are stored at

the same time.

Store less food products at the

same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.