Zanussi ZQF11432DA User Manual

The compressor does not start

immediately after pressing the

QuickFreeze, or after changing

the temperature.

This is normal, no error has oc-

curred.

The compressor starts after a pe-

riod of time.

Temperature cannot be set.

The QuickFreeze or QuickChill

function is switched on.

Switch off QuickFreeze or Quick-

Chill manually, or wait until the

function resets automatically to

set the temperature. Refer to

"QuickFreeze or QuickChill func-

tion".

The temperature in the appliance

is too low/too high.

The temperature regulator is not

set correctly.

Set a higher/lower temperature.

The door is not closed correctly.

Refer to "Closing the door".

The food products' temperature

is too high.

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Many food products are stored at

the same time.

Store less food products at the

same time.

The thickness of the frost is

greater than 4-5 mm.

Defrost the appliance.

The door has been opened often. Open the door only if necessary.

The QuickFreeze function is

switched on.

Refer to "QuickFreeze function".

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

If the advice does not lead to the

desired result, call the nearest

Authorized Service Centre.

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Refer to Safety chapters.

Refer to the assembly instructions

for the installation.

To ensure best performance, install the

appliance well away from sources of heat such

as radiators, boilers, direct sunlight etc. Make

sure that air can circulate freely around the back

of the cabinet.