Zanussi ZDC8203W User Manual

CAUTION! Do not use abrasive

materials or steel wool to clean the

drum.

HOUSING
Use a standard neutral soap detergent to clean the

control panel and housing.
Use a moist cloth to clean. Dry the cleaned

surfaces with a soft cloth.

CAUTION! Do not use furniture

cleaning agents or cleaning agents

which can cause corrosion to clean

the appliance.

CLEANING THE AIRFLOW SLOTS
Use a vacuum cleaner to remove the fluff from the

airflow slots.

You cannot activate the appliance.

Make sure that the mains plug is connected to

the mains socket.

 

Check fuse in fuse box (domestic installation).

The programme does not start.

Press Start/Pause.

 

Make sure that the appliance door is closed.

The appliance door does not close.

Make sure that the installation of the filter is cor-

rect.

 

Make sure that the laundry does not catch be-

tween the appliance door and the rubber seal.

The appliance stops during operation.

Make sure that the water container is empty.

Press Start/Pause to start the programme again.

The display shows a long programme duration. 

Make sure that the weight of the laundry is appli-

cable to the duration of the programme.

 

Make sure that the filter is clean.

 

The laundry is too wet. Spin the laundry in the

washing machine again.

 

Make sure that the room temperature is not too

warm.

The display shows a short programme duration.

Set the Time Drying or the Extra Dry programme.

The display shows Err.

If you want to set a new programme, deactivate

and activate the appliance.

 

Make sure that the options are applicable to the

programme.

The display shows (e.g. E51).

Deactivate and activate the appliance. Start a

new programme. If the problem occurs again,

contact the Service.

1) After maximum 5 hours, the programme ends automatically