Zanussi ZDH8333P User Manual

Page of 16
Problem
Possible solution
 
The laundry is too wet. Spin the laundry in the
washing machine again.
 
Make sure that the room temperature is not too
warm.
The display shows a short programme duration.
Set the Time Drying or the Extra Dry programme.
The display shows Err.
If you want to set a new programme, deactivate
and activate the appliance.
 
Make sure that the options are applicable to the
programme.
The display shows (e.g. E51).
Deactivate and activate the appliance. Start a
new programme. If the problem occurs again,
contact the Service.
1) After maximum 5 hours, the programme ends automatically
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor.
• The airflow slots are clogged.
TECHNICAL DATA
Height x Width x Depth
850 x 600 x 600 mm (maximal 680 mm)
Max. depth with the appliance door open
1090 mm
Max. width with the appliance door open
950 mm
Adjustable height
850 mm (+ 15 mm - feet regulation)
Drum volume
118 l
Maximum load volume
8 kg
Voltage
230 - 240 V
Frequency
50 Hz
Necessary fuse
13 A
Total power
950 W
Energy efficiency class
A+
Energy consumption
1)
2,65 kWh
Annual energy consumption
2)
308 kWh
Left—on mode power absorption
0,44 W
Off mode power absorption
0,44 W
14