Zanussi ZDH7332P User Manual

Disconnect the appliance before you

clean it.

Use a standard neutral soap detergent to clean

the inner surface of the drum and drum ribs. Dry

the cleaned surfaces with a soft cloth.

Do not use abrasive materials or

steel wool to clean the drum.

Use a standard neutral soap detergent to clean

the control panel and housing.

Use a moist cloth to clean. Dry the cleaned

surfaces with a soft cloth.

Do not use furniture cleaning agents

or cleaning agents which can cause

corrosion to clean the appliance.

Use a vacuum cleaner to remove the fluff from

the airflow slots.

You cannot activate the appliance.

Make sure that the mains plug is connected to the

mains socket.

 

Check fuse in fuse box (domestic installation).

The programme does not start.

Press Start/Pause.

 

Make sure that the appliance door is closed.

The appliance door does not close.

Make sure that the installation of the filter is cor-

rect.

 

Make sure that the laundry does not catch between

the appliance door and the rubber seal.

The appliance stops during operation.

Make sure that the water container is empty. Press

Start/Pause to start the programme again.

Drying cycle lasts an unusually long time.

Make sure that the weight of the laundry is applica-

ble to the duration of the programme.

 

Make sure that the filter is clean.

 

The laundry is too wet. Spin the laundry in the

washing machine again.

 

Make sure that the room temperature is not too

warm.

Drying cycle ends shortly after programme starts.

Set the Time Drying or the Extra Dry programme.

1) After maximum 5 hours, the programme ends automatically

If the drying results are not satisfactory
• The set programme was incorrect.

• The filter is clogged.

• The condenser is clogged.

• There was too much laundry in the

appliance.

• The drum is dirty.