Zanussi ZDH8333P User Manual

Do not use furniture cleaning agents

or cleaning agents which can cause

corrosion to clean the appliance.

Use a vacuum cleaner to remove the fluff from

the airflow slots.

You cannot activate the appliance.

Make sure that the mains plug is connected to the

mains socket.

 

Check fuse in fuse box (domestic installation).

The programme does not start.

Press Start/Pause.

 

Make sure that the appliance door is closed.

The appliance door does not close.

Make sure that the installation of the filter is cor-

rect.

 

Make sure that the laundry does not catch between

the appliance door and the rubber seal.

The appliance stops during operation.

Make sure that the water container is empty. Press

Start/Pause to start the programme again.

The display shows a long programme duration. 

Make sure that the weight of the laundry is applica-

ble to the duration of the programme.

 

Make sure that the filter is clean.

 

The laundry is too wet. Spin the laundry in the

washing machine again.

 

Make sure that the room temperature is not too

warm.

The display shows a short programme duration.

Set the Time Drying or the Extra Dry programme.

The display shows Err.

If you want to set a new programme, deactivate

and activate the appliance.

 

Make sure that the options are applicable to the

programme.

The display shows (e.g. E51).

Deactivate and activate the appliance. Start a new

programme. If the problem occurs again, contact

the Service.

1) After maximum 5 hours, the programme ends automatically

If the drying results are not satisfactory
• The set programme was incorrect.

• The filter is clogged.

• The condenser is clogged.

• There was too much laundry in the

appliance.

• The drum is dirty.

• Incorrect setting of the conductivity sensor.

• The airflow slots are clogged.